Windows Password Remover Boot USB
10:11 AM
By
Unknown
Offline Windows Password & Registry Editor, Bootdisk
The password reset and registry edit has now been tested with the following:
NT 3.51, NT 4, Windows 2000, Windows XP, Windows 2003 Server,
Vista, Windows 7, Server 2008, Windows 8, Windows 8.1, Server 2012
As far as I know, it will work with all Service Packs (SP) and
all editions (Professional, Server, Home etc)
Also, 64 bit windows versions should be OK.
How to use?
If you have the USB, all drivers are included.
Overview
1. Get the machine to boot from the USB drive.
2. Load drivers (usually automatic, but possible to run manual select)
3. Disk select, tell which disk contains the Windows system. Optionally you will have to load drivers.
4. PATH select, where on the disk is the system? (now usually automatic)
5. File select, which parts of registry to load, based on what you want to do.
6. Password reset or other registry edit.
7. Write back to disk (you will be asked)
DON'T PANIC!! - Most questions can usually be answered with the default answer which is given in [brackets]. Just press enter/return to accept the default answer.
To make a bootable USB drive / key:
1. Copy all files from this CD onto the USB drive.
It cannot be in a subdirectory on the drive.
You do not need delete files already on the drive.
2. Install the bootloader
On the USB drive, there should now be a file "syslinux.exe".
Start a command line window (cmd.exe) with "run as administrator"
From the command line, run the command like this:
X:\syslinux.exe -ma X:
replace x with some other letter if your USB drive is on another
drive letter than x:
On some drives, you may have to omit the -ma option if you
get an error.
If it says nothing, it probably did install the bootloader.
Please note that you may have to adjust settings in your computers BIOS
setup to boot from USB.
To Download, Click the download button then wait 5 secs and click SKIP AD.
Please leave a comment and Like us on Facebook.
Thank You.
The password reset and registry edit has now been tested with the following:
NT 3.51, NT 4, Windows 2000, Windows XP, Windows 2003 Server,
Vista, Windows 7, Server 2008, Windows 8, Windows 8.1, Server 2012
As far as I know, it will work with all Service Packs (SP) and
all editions (Professional, Server, Home etc)
Also, 64 bit windows versions should be OK.
How to use?
If you have the USB, all drivers are included.
Overview
1. Get the machine to boot from the USB drive.
2. Load drivers (usually automatic, but possible to run manual select)
3. Disk select, tell which disk contains the Windows system. Optionally you will have to load drivers.
4. PATH select, where on the disk is the system? (now usually automatic)
5. File select, which parts of registry to load, based on what you want to do.
6. Password reset or other registry edit.
7. Write back to disk (you will be asked)
DON'T PANIC!! - Most questions can usually be answered with the default answer which is given in [brackets]. Just press enter/return to accept the default answer.
To make a bootable USB drive / key:
1. Copy all files from this CD onto the USB drive.
It cannot be in a subdirectory on the drive.
You do not need delete files already on the drive.
2. Install the bootloader
On the USB drive, there should now be a file "syslinux.exe".
Start a command line window (cmd.exe) with "run as administrator"
From the command line, run the command like this:
X:\syslinux.exe -ma X:
replace x with some other letter if your USB drive is on another
drive letter than x:
On some drives, you may have to omit the -ma option if you
get an error.
If it says nothing, it probably did install the bootloader.
Please note that you may have to adjust settings in your computers BIOS
setup to boot from USB.
To Download, Click the download button then wait 5 secs and click SKIP AD.
Windows Password Remover | 16.8 MB
Please leave a comment and Like us on Facebook.
Thank You.
2 comments:
Feel free to comment, to inquire and to suggest. Pls leave a comment.